Have questions? Call (888) 500-0145

Coolster ATVs: Where Are They Made and How to Use Them?

The popularity of all-terrain vehicles continues to grow. In 2006, the Coolster ATV rose to fame alongside other Chinese ATV brands. More than 15 years later, the Coolster ATV still remains one of the most popular ATV models in the market.

What is a Coolster ATV?

Coolster is a Chinese company that has been manufacturing ATVs for decades. Back then, the market was too narrow as people knew too little about ATVs. However, Coolster entered the American market and changed the industry. 

The Chinese company featured rear tracks, flexible tire tread patterns, and detailed operating guidance on setting up and using safety features. Through this, they became a well-known brand in the ATV industry.

The Coolster ATV has various models with different speeds from 125cc to the 150cc model, where speeds could go from 25mph to 58mph. On average, a Coolster 110cc reaches 12mph without a transmission. However, it can go up to 23mph with a five-speed transmission. Through modding, the Coolster 125cc transmission can go up to 40mph from the minimum of 25mph. Meanwhile, the max speed for the 150cc model is 58mph.

Currently, the Coolster brand sells a wide variety of vehicles to choose from. However, their most popular products are the Coolster 110cc ATV, Coolster 125cc ATV, and the Coolster 150cc ATV. The Coolster ATV provides consumers with a brilliant combination of sport and utility. It has foot breaks, a throttle governor, a speed limiter, and a remote kill switch—all safety features that ensure a smooth and safe drive.

How to Start a Coolster ATV?

For first-time users of Coolster ATVs, the first problem you’ll face is how to start it. ATVs and regular motorbikes have different operating systems, which makes can be challenging for first-timers.

  • Fill Up on Gas and Check the Battery.
  • Before anything else, make sure that the vehicle has enough gas to start and run. The tank should contain at least half the full amount. After checking for gas, check if the ATV’s battery is charged. Even if the ATV runs on gas, it still needs electricity to start. Before every trip, make sure to connect it to a wall socket and charge it with a 12V charger.

  • Ignite and Spark.
  • To spark the engine, locate the “run” or “kill” switch on the ATV and keep it in the “on” position, or else you can’t start your Coolster. After this, insert the key in the dedicated keyhole. 

    To start a cold engine, the choke valve needs to be open. It prevents the flow of air in the carburetor of an engine. In most ATVs, it can be found in the carburetor. However, in others, you need to actuate “choking” by the left side by pressing or pushing a button upwards.

  •  Start The Engine.
  • To start the engine, press the starter button. It is usually located on the right side of the handle. But before pressing the button, open the throttle a few times to get the gas moving inside the carburetor jets. When the engine starts for the first time and makes the sound, let it warm up for a bit before applying throttle. There is no need to initiate a choke after it warms up. Before you go, make sure to check the brakes, tires, and acceleration.

    Conclusion

    If you’re planning to invest in ATVs, Coolster ATVs are the best brand and model of ATVs to start with. They are safe, affordable, and easy to use. From there, you can buy a much more complex ATV once you gain experience. But before buying, try to research first and learn the specifications to choose the right model.

    Tribal Motorsports is a US-based dealer dedicated to providing powersports products at half of the cost of most dealers. With ten years of experience under our belt, we strive to deliver the best service at the most affordable prices. Explore our website today and check out the best ATVs for your preference.